The refrigeration and freezing chamber industry is a necessary industry in many areas. Large enterprises resort to creating cooling and freezing chambers to preserve their products in large quantities. The temperature of the Refrigerating and freezing chambers depends on the product being preserved, and we find the use of refrigerating and freezing chambers in many areas .. We highlight to you the most important of these areas that rely heavily on cold rooms, as well as the most important features of this type of room.
Areas of cold room industry
- Factories of food products.
- Pharmaceutical factories.
- All types of farms.
- Large shopping centers.
- Military units.
- Ship ports.
- Some government ministries such as (Ministry of Health-Ministry of industry and trade)
- Restaurants and hotels.
- Palaces and villas.
Features of refrigerating and cold room
Refrigeration and freezing rooms have many advantages, including:
- The possibility of adjusting it completely according to demand to suit different spaces.
- Easy organization and access of stored products, as they are characterized by open designs.
- They are installed outside the working area, which helps to eliminate excess heat and noise inside the area.
- They allow storing large volumes of products.
- It may consume less energy when used instead of storing in several vertical refrigerators.
- They can be placed inside or outside the building.
- Economical compared to other cooling methods, there are cooling rooms at low prices that suit all fields.
Steps for the design of any cold room
- Determine the dimensions of the room.
- Calculation of thermal loads.
- Choose the right insulation.
- Choose the appropriate refrigeration unit, including a compressor and an evaporator.
Components of refrigerating and cold rooms from the international company for refrigerating rooms
The walls
- The company manufactures a type of walls called sandwich panel walls, these walls are made of polyurethane material with a density of 40 kg /cubic meter, and this material is injected between two layers of electrostatic coated galvanized sheet, covered with a layer of plastic to protect sheet thickness of 0.5 mm.
- The walls are assembled to each other with a lover and adored system to ensure no heat leakage.
- The walls are assembled with the ceiling and corners by aluminum corners, on which an oblique angle is fixed in the form of a quarter circle, the ends of which are finished with a rubber layer to ensure cleanliness in use and not to form bacteria.
- Sandwich panel spacers after installation are insulated with antibacterial silicone material.
- The last installation step is to seal the corners and outer corners with a sheet metal manufactured for this purpose.
Flooring
- The floors at the international company for refrigeration and freezing rooms are made of polyurethane with a density of 40 kg / cubic meter, and this material is injected between a layer of electrostatic greased Galvanized Sheet on the one hand and a layer of 13 mm thick Polywood on the other .
- A layer of fiberglass 2 : 4 mm thick is made on top of the Polywood layer to obtain a non-smooth surface that can be handled in charging and unloading the refrigerator by personnel, without worrying about the possibility of personnel slipping .
Fiberglass material is characterized by the following:
- High hardness.
- Not easily scratched or broken.
- The aluminum plate Thanksgiving board layer can be added on top of the fiber layer.
- The fiberglass coating on the floors makes it easy to clean and disinfect without damaging the floor.
- A 10 cm high finish is made on the side of the walls so as not to leak any liquids between the walls of the room and the floor.
The international company for cold rooms offers many other services from cold room doors, cold cranes and cold boxes. The prices of cooling boxes at the international company for cold rooms are characterized by being the lowest.. In exchange for the highest quality to suit everyone.
